A budget friendly neck to build your own guitar. The neck is made from Canadian maple with a Canadian maple fingerboard. A maple cap neck is what was used in the late '60s and can be found on some expensive custom shop guitars nowadays. This neck has a dual action trussrod installed so you can set the guitar up for perfect playability.
The machine head hole has a diameter of 10mm. The fingerboard radius of 9,5" is used in most USA-made guitar necks of this type. It is comfortable and allows for a low action and great playability. The jumbo frets have been levelled and only need crowning and final polishing. The paddle headstock allows you to make your own design and stand out from the crowd.
The tuner holes are 10 mm, allowing for modern machine heads. If you prefer vintage type machine heads, you will need conversion bushings. Neck width is 42mm, the width of the heel is 56mm, conform all standard guitar bodies.
